At a glance
Busy doors in Eltham (SE9) that close automatically need reliable detection. A full-height light curtain stops the door before it touches anyone, with a safety edge on the bottom rail as back-up.
- Town
- Eltham
- Postcode district
- SE9
- Area
- Greater London
- Survey
- Free for new installations
What to specify
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
- Light curtains. Full-height multi-beam detection across the whole opening.
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Photocells. If something breaks the beam, the door will not close.
Jobs we can carry out
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Safety law for industrial doors in England
Industrial doors in Eltham are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Keeping your site running during the work
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Prices for door safety upgrades in Eltham
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about door safety upgrades
Our door at our Eltham site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Do you upgrade doors from other installers across Greater London?
Yes. We upgrade safety devices on most makes of powered door across Greater London, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
How long does a safety upgrade take in Eltham?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Door safety upgrades near Eltham
Our teams cover Eltham (SE9) and nearby Blackheath, Welling, Sidcup, along with the rest of Greater London.
- Door safety upgrades in Blackheath
- Door safety upgrades in Welling
- Door safety upgrades in Sidcup
- Door safety upgrades in Woolwich
- Door safety upgrades in Lewisham
- Door safety upgrades in Catford
Other services in Eltham
- Industrial door motor replacement
- Industrial roller shutters
- Dock leveller and loading bay repairs
- Bollards and door protection
- Industrial door installation
- Sectional overhead doors
- Sliding and folding industrial doors
- Steel personnel and fire exit doors
More about Door safety upgrades · industrial doors in Eltham. Last updated 19 October 2026.