The short version
Every safety upgrade in Chepstow starts with a free survey and force test of the door as it stands, followed by a written fixed price for the devices we recommend before any work starts.
- Town
- Chepstow
- Postcode district
- NP16
- Area
- Gwent
- Survey
- Free for new installations
What to specify
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Light curtains. Full-height multi-beam detection across the whole opening.
- Force testing. We measure how hard the door closes and record the results at each test point.
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
- Safety edges. Edges on the closing rail detect contact and send the door back up.
Jobs we can carry out
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
- Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
Safety law for industrial doors in Wales
Industrial doors in Chepstow are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Planning the work around your site
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Budgeting for door safety upgrades in Chepstow
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Chepstow
Can you force-test our doors in Chepstow?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Our door at our Chepstow site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Do our powered doors in Chepstow need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
Door safety upgrades near Chepstow
Working in Chepstow? We also take on jobs in Newport (Gwent), Cwmbran, Pontypool and across Gwent.
- Door safety upgrades in Newport (Gwent)
- Door safety upgrades in Cwmbran
- Door safety upgrades in Pontypool
- Door safety upgrades in Risca
- Door safety upgrades in Abergavenny
- Door safety upgrades in Caerphilly
Other services in Chepstow
- Dock shelters and seals
- Industrial door repairs
- Fire shutter servicing and drop tests
- Door automation and controls
- Bollards and door protection
- Planned maintenance contracts
- Steel personnel and fire exit doors
- Industrial door motor replacement
More about Door safety upgrades · industrial doors in Chepstow. Last updated 19 October 2026.