The short version
Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Potters Bar. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.
- Town
- Potters Bar
- Postcode district
- EN6
- Area
- Hertfordshire
- Survey
- Free for new installations
Options for door safety upgrades in Potters Bar
- Records. You receive a record of the devices fitted and the tests carried out.
- Force testing. We measure how hard the door closes and record the results at each test point.
- Photocells. Beams across the opening that stop the door closing while broken.
- Fall protection. Spring-break, cable-break and anti-fall devices against suspension failure.
- Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
Examples of work we can quote for
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
Who is responsible for door safety at a site in Potters Bar?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Prices for door safety upgrades in Potters Bar
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about door safety upgrades
Do our powered doors in Potters Bar need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
Our door at our Potters Bar site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Can you force-test our doors in Potters Bar?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Door safety upgrades near Potters Bar
Our teams cover Potters Bar (EN6) and nearby Barnet, Enfield, Borehamwood, along with the rest of Hertfordshire.
- Door safety upgrades in Barnet
- Door safety upgrades in Enfield
- Door safety upgrades in Borehamwood
- Door safety upgrades in Hatfield
- Door safety upgrades in Cheshunt
- Door safety upgrades in Finchley
Other services in Potters Bar
- Fire shutter servicing and drop tests
- High-speed doors
- Dock shelters and seals
- Cold store and freezer doors
- Sliding and folding industrial doors
- Dock levellers
- Industrial door motor replacement
- Door automation and controls
More about Door safety upgrades · industrial doors in Potters Bar. Last updated 19 October 2026.