In short
We can carry out safety upgrades and force testing on industrial doors in Bedfordshire and across the East of England, recording every result for your maintenance file and updating each door's risk assessment to match.
- Area
- Bedfordshire
- Nation
- England
- Main town
- Luton
- Survey
- Free for new installations
Options that matter on site
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Records. You receive a record of the devices fitted and the tests carried out.
- Safety edges. Edges on the closing rail detect contact and send the door back up.
- Warning devices. Lights and sounders make sure people know when a door is about to move.
- Force testing. We measure how hard the door closes and record the results at each test point.
Examples of work we can quote for
- Carrying out safety upgrades on the powered doors of a newly leased unit before a tenant moves in.
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Who is responsible for door safety at a site in Bedfordshire?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Keeping your site running during the work
For busy sites in the East of England the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Budgeting for door safety upgrades in Bedfordshire
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Door safety upgrades in Bedfordshire: your questions
Do you upgrade doors from other installers across the East of England?
Yes. We upgrade safety devices on most makes of powered door across the East of England, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
Do our powered doors in Bedfordshire need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
Will a safety upgrade at our Bedfordshire premises include paperwork?
Yes. We record the devices fitted, the force test results and any changes to the control panel, and update the door's risk assessment, giving you written evidence that the door was checked and upgraded.
Towns in Bedfordshire we cover
We cover 5 towns in Bedfordshire for door safety upgrades, including Luton, Bedford, Dunstable, Leighton Buzzard.
Other services in Bedfordshire
- Sliding and folding industrial doors
- PVC strip curtains
- Industrial roller shutters
- Planned maintenance contracts
- Dock leveller and loading bay repairs
- Industrial door replacement
- Door automation and controls
- Sectional overhead doors
More about Door safety upgrades. Last updated 19 October 2026.