Quick answer
Every safety upgrade in Sittingbourne starts with a free survey and force test of the door as it stands, followed by a written fixed price for the devices we recommend before any work starts.
- Town
- Sittingbourne
- Postcode district
- ME10
- Area
- Kent
- Survey
- Free for new installations
What we fit in Sittingbourne
- Fall protection. Spring-break, cable-break and anti-fall devices against suspension failure.
- Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
- Photocells. If something breaks the beam, the door will not close.
- Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
Jobs we can carry out
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
- Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
Who is responsible for door safety at a site in Sittingbourne?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
Sites in and around Sittingbourne vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Prices for door safety upgrades in Sittingbourne
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Door safety upgrades in Sittingbourne: your questions
How long does a safety upgrade take in Sittingbourne?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
How much does a door safety upgrade cost in Sittingbourne?
Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Sittingbourne.
Do our powered doors in Sittingbourne need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
Door safety upgrades near Sittingbourne
Working in Sittingbourne? We also take on jobs in Faversham, Gillingham, Chatham and across Kent.
- Door safety upgrades in Faversham
- Door safety upgrades in Gillingham
- Door safety upgrades in Chatham
- Door safety upgrades in Rochester
- Door safety upgrades in Maidstone
- Door safety upgrades in Strood
Other services in Sittingbourne
- Hangar and large-span doors
- Insulated roller shutter doors
- Bollards and door protection
- PVC strip curtains
- Door automation and controls
- Fire shutter servicing and drop tests
- Dock shelters and seals
- Complete loading bays
More about Door safety upgrades · industrial doors in Sittingbourne. Last updated 19 October 2026.