Door safety upgrades in Chatham

In short

Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Chatham. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.

Town: Chatham
Postcode district: ME4
Area: Kent
Survey: Free for new installations

What to specify

Light curtains. Many beams from floor to head detect people and vehicles anywhere in the opening.
Records. You receive a record of the devices fitted and the tests carried out.
Fall protection. Spring-break, cable-break and anti-fall devices against suspension failure.
Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
Photocells. Beams across the opening that stop the door closing while broken.

Examples of work we can quote for

Carrying out safety upgrades on the powered doors of a newly leased unit before a tenant moves in.
Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.

Powered door rules that apply in Chatham

Chatham is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for door safety upgrades in Chatham

Door safety upgrades guide prices
Item	Guide price (ex VAT)
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door
Repair visit (attendance and first hour)	£145 – £195

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Door safety upgrades in Chatham: your questions

How much does a door safety upgrade cost in Chatham?

Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Chatham.

Our door at our Chatham site has a bypassed safety edge. What should we do?

Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.

Can you force-test our doors in Chatham?

Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.

Door safety upgrades near Chatham

Working in Chatham? We also take on jobs in Rochester, Gillingham, Strood and across Kent.

Other services in Chatham

More about Door safety upgrades · industrial doors in Chatham. Last updated 19 October 2026.