Quick answer
Older door control panels may not accept modern monitored safety devices. At premises in Rawtenstall, we can replace them where needed, adding inverter control and better fault diagnostics in the same visit.
- Town
- Rawtenstall
- Postcode district
- BB4
- Area
- Lancashire
- Survey
- Free for new installations
What we fit in Rawtenstall
- Photocells. Beams across the opening that stop the door closing while broken.
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
- Fall protection. Spring-break, cable-break and anti-fall devices against suspension failure.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Records. Written results and updated risk assessment for your files.
Jobs we can carry out
- Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
Who is responsible for door safety at a site in Rawtenstall?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Budgeting for door safety upgrades in Rawtenstall
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Door safety upgrades in Rawtenstall: your questions
Do you upgrade doors from other installers across Lancashire?
Yes. We upgrade safety devices on most makes of powered door across Lancashire, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
Our door at our Rawtenstall site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Can you force-test our doors in Rawtenstall?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Door safety upgrades near Rawtenstall
Besides Rawtenstall, we can survey and quote for sites in Accrington, Bury, Burnley and the rest of Lancashire.
- Door safety upgrades in Accrington
- Door safety upgrades in Bury
- Door safety upgrades in Burnley
- Door safety upgrades in Darwen
- Door safety upgrades in Rochdale
- Door safety upgrades in Heywood
Other services in Rawtenstall
- Complete loading bays
- Bollards and door protection
- Steel personnel and fire exit doors
- Dock leveller and loading bay repairs
- Insulated roller shutter doors
- Cold store and freezer doors
- Impact traffic doors
- Sectional overhead doors
More about Door safety upgrades · industrial doors in Rawtenstall. Last updated 19 October 2026.