In short
Is a powered door at your Norwich site missing safety devices, or are they damaged or bypassed? We bring older doors up to date with monitored safety edges, photocells, light curtains and fall protection.
- Town
- Norwich
- Postcode district
- NR2
- Area
- Norfolk
- Survey
- Free for new installations
What to specify
- Light curtains. Full-height multi-beam detection across the whole opening.
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
- Records. You receive a record of the devices fitted and the tests carried out.
- Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
Jobs we can carry out
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
- Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
Powered door rules that apply in Norwich
Norwich is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Keeping your site running during the work
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Norwich
Do you upgrade doors from other installers across Norfolk?
Yes. We upgrade safety devices on most makes of powered door across Norfolk, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
Our door at our Norwich site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
How much does a door safety upgrade cost in Norwich?
Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Norwich.
Door safety upgrades near Norwich
Besides Norwich, we can survey and quote for sites in Great Yarmouth, Lowestoft, Thetford and the rest of Norfolk.
- Door safety upgrades in Great Yarmouth
- Door safety upgrades in Lowestoft
- Door safety upgrades in Thetford
- Door safety upgrades in Stowmarket
- Door safety upgrades in Bury St Edmunds
- Door safety upgrades in King's Lynn
Other services in Norwich
- Fire shutter servicing and drop tests
- Industrial door motor replacement
- Sliding and folding industrial doors
- Dock leveller and loading bay repairs
- Bollards and door protection
- Industrial door repairs
- Planned maintenance contracts
- Fire shutters
More about Door safety upgrades · industrial doors in Norwich. Last updated 19 October 2026.
