The short version
Every safety upgrade in Renfrewshire and Dunbartonshire starts with a free survey and force test of the door as it stands, followed by a written fixed price for the devices we recommend before any work starts.
- Area
- Renfrewshire and Dunbartonshire
- Nation
- Scotland
- Main town
- Paisley
- Survey
- Free for new installations
Options for door safety upgrades in Renfrewshire and Dunbartonshire
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Records. You receive a record of the devices fitted and the tests carried out.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Photocells. Beams across the opening that stop the door closing while broken.
- Panel upgrades. Control panels with monitored safety inputs where older ones fall short.
What this work can involve
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
- Carrying out safety upgrades on the powered doors of a newly leased unit before a tenant moves in.
Who is responsible for door safety at a site in Renfrewshire and Dunbartonshire?
In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Budgeting for door safety upgrades in Renfrewshire and Dunbartonshire
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Door safety upgrades in Renfrewshire and Dunbartonshire: your questions
Our door at our Renfrewshire and Dunbartonshire site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
How much does a door safety upgrade cost in Renfrewshire and Dunbartonshire?
Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Renfrewshire and Dunbartonshire.
Will a safety upgrade at our Renfrewshire and Dunbartonshire premises include paperwork?
Yes. We record the devices fitted, the force test results and any changes to the control panel, and update the door's risk assessment, giving you written evidence that the door was checked and upgraded.
Towns in Renfrewshire and Dunbartonshire we cover
We cover 10 towns in Renfrewshire and Dunbartonshire for door safety upgrades, including Paisley, Greenock, Bearsden, Newton Mearns.
Other services in Renfrewshire and Dunbartonshire
- Dock levellers
- Sectional overhead doors
- High-speed doors
- Sliding and folding industrial doors
- Planned maintenance contracts
- Fire shutters
- Steel personnel and fire exit doors
- PVC strip curtains
More about Door safety upgrades. Last updated 19 October 2026.