Sectional overhead doors in Dunstable

In short

Sectional doors suit premises in Dunstable that need a well-sealed, insulated opening that stays clear of the yard. We handle the survey, specification, installation and commissioning, then service the door if you want us to.

Town: Dunstable
Postcode district: LU6
Area: Bedfordshire
Survey: Free for new installations

What to specify

Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.
Vision panels. Glazed rows or full-vision sections bring daylight in and let drivers see the yard.
Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.
Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.

Jobs we can carry out

Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.
Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.
Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.

Who is responsible for door safety at a site in Dunstable?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

For busy sites in Bedfordshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Guide prices for sectional overhead doors

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Which safety devices does a powered sectional door in Dunstable need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Do you service sectional doors in Bedfordshire?

Yes. We service and repair most makes of sectional door across Bedfordshire, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Can you replace a roller shutter with a sectional door at our Dunstable unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Sectional overhead doors near Dunstable

Our teams cover Dunstable (LU6) and nearby Luton, Leighton Buzzard, Harpenden, along with the rest of Bedfordshire.

Other services in Dunstable

More about Sectional overhead doors · industrial doors in Dunstable. Last updated 19 October 2026.