Sectional overhead doors in Crewe

At a glance

Sectional overhead doors for warehouses, workshops and loading bays in Crewe. We survey the opening, specify the panels, tracks and drive to suit how the door is used, then install and commission it with full handover paperwork.

Town: Crewe
Postcode district: CW1
Area: Cheshire
Survey: Free for new installations

What we fit in Crewe

Paperwork. Declaration of Performance, user instructions and commissioning records handed over on completion.
Finishes. RAL colours to match cladding, with stucco or woodgrain embossing on the outer skin.
Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
Track layouts. We pick the track after measuring headroom and obstructions, so the door clears lights, sprinklers and crane rails.
Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.

Jobs we can carry out

Supplying full-vision aluminium sections for a vehicle workshop door so technicians get daylight without opening the door.
Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.
Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.

Safety law for industrial doors in England

Industrial doors in Crewe are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Sites in and around Crewe vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sectional overhead doors in Crewe: your questions

Will a sectional door reduce heating costs at our Crewe premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Do you survey sites in Crewe before quoting?

Yes. Surveys for new and replacement doors are free. We measure the opening, headroom and obstructions, check the fixings and power supply, and discuss how the door will be used before we price it.

Do you service sectional doors in Cheshire?

Yes. We service and repair most makes of sectional door across Cheshire, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Sectional overhead doors near Crewe

Crewe is in the CW1 postcode district in Cheshire. We also cover Winsford, Kidsgrove, Congleton.

Other services in Crewe

More about Sectional overhead doors · industrial doors in Crewe. Last updated 19 October 2026.