Industrial door replacement in Crewe

Quick answer

We can replace roller shutters, sectional doors, sliding doors and high-speed doors in Crewe and across Cheshire, removing and disposing of the old door and fitting the new one in a single, carefully planned visit.

Town: Crewe
Postcode district: CW1
Area: Cheshire
Survey: Free for new installations

What we fit in Crewe

Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
Opening repairs. Damaged jambs and heads repaired or new framing fitted.
Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
Commissioning. Each new door is tested and handed over with the documents it needs.
Right door type. Replace with the same type or move to a door that suits your current needs.

What this work can involve

Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Swapping a standard shutter for a security-rated door installed exactly to the manufacturer's certified specification.
Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.

Who is responsible for door safety at a site in Crewe?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Most installations in Crewe can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door replacement in Crewe: your questions

How long will our opening in Crewe be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

How much does industrial door replacement cost in Crewe?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Crewe.

Can we change door type when replacing at our Crewe unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Industrial door replacement near Crewe

Crewe is in the CW1 postcode district in Cheshire. We also cover Winsford, Kidsgrove, Congleton.

Other services in Crewe

More about Industrial door replacement · industrial doors in Crewe. Last updated 19 October 2026.