Sectional overhead doors in Poole

The short version

Sectional doors suit premises in Poole that need a well-sealed, insulated opening that stays clear of the yard. We handle the survey, specification, installation and commissioning, then service the door if you want us to.

Town: Poole
Postcode district: BH15
Area: Dorset
Survey: Free for new installations

Options that matter on site

Finishes. Choose a colour to match your building and a stucco or ribbed finish that hides minor knocks.
Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
Vision panels. Glazed rows or full-vision sections bring daylight in and let drivers see the yard.
Safety devices. Every powered door is fitted with the safety functions its risk assessment needs and force-tested before handover.
Track layouts. Standard, low headroom, high lift and vertical lift tracks, chosen after measuring your headroom.

Typical scopes of work

Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.
Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.
Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.

Powered door rules that apply in Poole

Poole is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Most installations in Poole can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices for sectional overhead doors

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about sectional overhead doors

Which safety devices does a powered sectional door in Poole need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Can you replace a roller shutter with a sectional door at our Poole unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Will a sectional door reduce heating costs at our Poole premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Sectional overhead doors near Poole

Besides Poole, we can survey and quote for sites in Bournemouth, Christchurch, New Milton and the rest of Dorset.

Other services in Poole

More about Sectional overhead doors · industrial doors in Poole. Last updated 19 October 2026.