Industrial door replacement in Poole

In short

Is an old door at your Poole site costing more in repairs than it is worth? We price replacement alongside repair so you can compare, then handle the whole changeover if replacement makes sense.

Town: Poole
Postcode district: BH15
Area: Dorset
Survey: Free for new installations

Options for industrial door replacement in Poole

Free survey. Existing door, opening and space assessed free of charge.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
Disposal. We take the old door away so there is nothing left on site to deal with.

Jobs we can carry out

Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.
Swapping a standard shutter for a security-rated door installed exactly to the manufacturer's certified specification.

Powered door rules that apply in Poole

Poole is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Budgeting for industrial door replacement in Poole

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door replacement in Poole: your questions

How long will our opening in Poole be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Is the survey free for door replacement in Poole?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

How much does industrial door replacement cost in Poole?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Poole.

Industrial door replacement near Poole

Poole is in the BH15 postcode district in Dorset. We also cover Bournemouth, Christchurch, New Milton.

Other services in Poole

More about Industrial door replacement · industrial doors in Poole. Last updated 19 October 2026.