Industrial door replacement in New Milton

At a glance

Is an old door at your New Milton site costing more in repairs than it is worth? We price replacement alongside repair so you can compare, then handle the whole changeover if replacement makes sense.

Town: New Milton
Postcode district: BH25
Area: Hampshire
Survey: Free for new installations

Options that matter on site

Commissioning. Safety devices tested, forces measured and instructions handed over.
Ongoing servicing. We can service the new door from the start so its history begins on day one.
Right door type. Replace with the same type or move to a door that suits your current needs.
Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
Opening repairs. Any damage to the opening is put right so the new door fixes securely.

Typical scopes of work

Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.
Swapping a standard shutter for a security-rated door installed exactly to the manufacturer's certified specification.
Phasing the replacement of several loading doors so only one bay is out of use at a time.

Who is responsible for door safety at a site in New Milton?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for industrial door replacement in New Milton

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in New Milton

Should we repair or replace our door in New Milton?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

Is the survey free for door replacement in New Milton?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

How much does industrial door replacement cost in New Milton?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in New Milton.

Industrial door replacement near New Milton

Working in New Milton? We also take on jobs in Christchurch, Bournemouth, Hythe and across Hampshire.

Other services in New Milton

More about Industrial door replacement · industrial doors in New Milton. Last updated 19 October 2026.