Sectional overhead doors in Burntwood

In short

Sectional overhead doors for warehouses, workshops and loading bays in Burntwood. We survey the opening, specify the panels, tracks and drive to suit how the door is used, then install and commission it with full handover paperwork.

Town: Burntwood
Postcode district: WS7
Area: Staffordshire
Survey: Free for new installations

What to specify

Safety devices. Every powered door is fitted with the safety functions its risk assessment needs and force-tested before handover.
Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.
Finishes. RAL colours to match cladding, with stucco or woodgrain embossing on the outer skin.
Paperwork. Declaration of Performance, user instructions and commissioning records handed over on completion.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.

Typical scopes of work

Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.
Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.

Who is responsible for door safety at a site in Burntwood?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

For busy sites in Staffordshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Prices for sectional overhead doors in Burntwood

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Burntwood

Which safety devices does a powered sectional door in Burntwood need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

How much is a sectional overhead door in Burntwood?

Our guide price for an electric, 40 mm insulated sectional door up to about 4 × 4.5 m is £3,495 to £8,495 ex VAT, supplied and fitted. The fixed price for your opening in Burntwood is confirmed in writing after a free survey.

Do you service sectional doors in Staffordshire?

Yes. We service and repair most makes of sectional door across Staffordshire, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Sectional overhead doors near Burntwood

Burntwood is in the WS7 postcode district in Staffordshire. We also cover Lichfield, Cannock, Aldridge.

Other services in Burntwood

More about Sectional overhead doors · industrial doors in Burntwood. Last updated 19 October 2026.