Sliding and folding industrial doors in Eastleigh

Quick answer

Wide opening, low eaves or an older structure in Eastleigh (SO50)? A sliding or folding door can be designed around it, with the weight of the leaves carried wherever the building can safely take it.

Town: Eastleigh
Postcode district: SO50
Area: Hampshire
Survey: Free for new installations

What to specify

Electric operation. Motor drives with safety edges, photocells and guarding where needed.
Insulated options. Leaves can be filled with insulated panels and sealed along their edges to cut heat loss.
Folding leaves. Bi-folding leaves stack neatly where side wall space is limited.
Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
Wide spans. Openings of almost any width split into as many leaves as needed.

Examples of work we can quote for

Automating a pair of heavy bi-parting sliding doors with a drive motor, safety edges and photocells.
Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.
Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.

Who is responsible for door safety at a site in Eastleigh?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Budgeting for sliding and folding industrial doors in Eastleigh

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Do you fit sliding doors on farm buildings around Hampshire?

Yes. We supply and fit steel sliding doors on agricultural buildings across Hampshire, including timber-clad leaves, bottom-rolling gear for lightweight portal frames and wicket doors so staff and livestock handlers can get in without opening the main leaves.

How much do sliding or folding industrial doors cost in Eastleigh?

Our guide price is £5,995 to £24,995 ex VAT, supplied and fitted, depending on size, number of leaves, infill and whether the doors are manual or electric. After a free survey in Eastleigh we confirm the fixed price in writing.

Do you repair sliding and folding doors in Eastleigh?

Yes. We replace trolleys, wheels, tracks, guides and damaged cladding on most makes of sliding and folding door. Repair visits are chargeable, and we quote before carrying out larger repairs or recommending replacement.

Sliding and folding industrial doors near Eastleigh

Our teams cover Eastleigh (SO50) and nearby Southampton, Winchester, Totton, along with the rest of Hampshire.

Other services in Eastleigh

More about Sliding and folding industrial doors · industrial doors in Eastleigh. Last updated 19 October 2026.