Industrial door replacement in Eastleigh

The short version

We can replace roller shutters, sectional doors, sliding doors and high-speed doors in Eastleigh and across Hampshire, removing and disposing of the old door and fitting the new one in a single, carefully planned visit.

Town: Eastleigh
Postcode district: SO50
Area: Hampshire
Survey: Free for new installations

What we fit in Eastleigh

Disposal. Old doors taken away for recycling or disposal.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Safe strip-out. Springs unwound and the old door dismantled safely.
Ongoing servicing. New door added to a maintenance schedule from year one.
Opening repairs. Damaged jambs and heads repaired or new framing fitted.

What this work can involve

Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.
Phasing the replacement of several loading doors so only one bay is out of use at a time.

Safety law for industrial doors in England

Industrial doors in Eastleigh are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Budgeting for industrial door replacement in Eastleigh

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Eastleigh

How long will our opening in Eastleigh be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

How much does industrial door replacement cost in Eastleigh?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Eastleigh.

Is the survey free for door replacement in Eastleigh?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

Industrial door replacement near Eastleigh

Besides Eastleigh, we can survey and quote for sites in Southampton, Winchester, Totton and the rest of Hampshire.

Other services in Eastleigh

More about Industrial door replacement · industrial doors in Eastleigh. Last updated 19 October 2026.