Insulated roller shutter doors in Eastleigh

Quick answer

Replacing a draughty roller shutter in Eastleigh? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Eastleigh
Postcode district: SO50
Area: Hampshire
Survey: Free for new installations

Options that matter on site

Electric drive. Tubular or external geared motors with a manual override for power cuts.
Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.

Examples of work we can quote for

Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.

Safety law for industrial doors in England

Industrial doors in Eastleigh are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

For busy sites in Hampshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Budgeting for insulated roller shutter doors in Eastleigh

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about insulated roller shutter doors

Will an insulated roller door cut heating bills at our Eastleigh premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

How much does an insulated roller shutter door cost in Eastleigh?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Eastleigh opening free of charge and then put a fixed price in writing.

Can you replace our old roller shutter in Eastleigh with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near Eastleigh

Eastleigh is in the SO50 postcode district in Hampshire. We also cover Southampton, Winchester, Totton.

Other services in Eastleigh

More about Insulated roller shutter doors · industrial doors in Eastleigh. Last updated 19 October 2026.