Insulated roller shutter doors in Winchester

In short

Replacing a draughty roller shutter in Winchester? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Winchester
Postcode district: SO23
Area: Hampshire
Survey: Free for new installations

What we fit in Winchester

Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.

Typical scopes of work

Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.

Who is responsible for door safety at a site in Winchester?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Prices for insulated roller shutter doors in Winchester

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Winchester

Will an insulated roller door cut heating bills at our Winchester premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Does a powered insulated roller door in Winchester need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Is there enough headroom for an insulated roller door at our Winchester unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Insulated roller shutter doors near Winchester

Working in Winchester? We also take on jobs in Eastleigh, Southampton, Totton and across Hampshire.

Other services in Winchester

More about Insulated roller shutter doors · industrial doors in Winchester. Last updated 19 October 2026.