Sectional overhead doors in Winchester

The short version

Sectional overhead doors for warehouses, workshops and loading bays in Winchester. We survey the opening, specify the panels, tracks and drive to suit how the door is used, then install and commission it with full handover paperwork.

Town: Winchester
Postcode district: SO23
Area: Hampshire
Survey: Free for new installations

Options that matter on site

Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.
Vision panels. Glazed rows or full-vision sections bring daylight in and let drivers see the yard.
Safety devices. Every powered door is fitted with the safety functions its risk assessment needs and force-tested before handover.
Electric drives. Motorised operation with the controls you need, from a simple push-button station to induction loops and radar.
Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.

Typical scopes of work

Renewing torsion springs and lift cables on a busy loading bay door, with higher-cycle springs where the usage justifies them.
Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.
Supplying full-vision aluminium sections for a vehicle workshop door so technicians get daylight without opening the door.

Who is responsible for door safety at a site in Winchester?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Most installations in Winchester can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about sectional overhead doors

How much is a sectional overhead door in Winchester?

Our guide price for an electric, 40 mm insulated sectional door up to about 4 × 4.5 m is £3,495 to £8,495 ex VAT, supplied and fitted. The fixed price for your opening in Winchester is confirmed in writing after a free survey.

Do you survey sites in Winchester before quoting?

Yes. Surveys for new and replacement doors are free. We measure the opening, headroom and obstructions, check the fixings and power supply, and discuss how the door will be used before we price it.

Which safety devices does a powered sectional door in Winchester need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Sectional overhead doors near Winchester

Besides Winchester, we can survey and quote for sites in Eastleigh, Southampton, Totton and the rest of Hampshire.

Other services in Winchester

More about Sectional overhead doors · industrial doors in Winchester. Last updated 19 October 2026.