Sliding and folding industrial doors in Oswestry

Quick answer

We can supply and fit steel sliding and bi-folding doors in Oswestry and across Shropshire, manual or electric, with insulated or single-skin leaves and wicket doors wherever staff need everyday access.

Town: Oswestry
Postcode district: SY11
Area: Shropshire
Survey: Free for new installations

What to specify

Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
Robust build. Steel-framed leaves with steel, panel or timber cladding.
Electric operation. Motorised leaves with the safety devices needed to protect against crushing and shearing.
No headroom needed. Leaves move sideways, so nothing coils above or runs under the roof.
Insulated options. Leaves can be filled with insulated panels and sealed along their edges to cut heat loss.

Typical scopes of work

Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.
Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.

Who is responsible for door safety at a site in Oswestry?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Sites in and around Oswestry vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for sliding and folding industrial doors in Oswestry

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sliding and folding industrial doors in Oswestry: your questions

Can our existing sliding doors in Oswestry be motorised?

Often, if the leaves and track are in good condition. We assess the doors, fit a drive and the safety devices needed, and take on the conformity responsibilities that come with converting a manual door to power.

Do you repair sliding and folding doors in Oswestry?

Yes. We replace trolleys, wheels, tracks, guides and damaged cladding on most makes of sliding and folding door. Repair visits are chargeable, and we quote before carrying out larger repairs or recommending replacement.

How much do sliding or folding industrial doors cost in Oswestry?

Our guide price is £5,995 to £24,995 ex VAT, supplied and fitted, depending on size, number of leaves, infill and whether the doors are manual or electric. After a free survey in Oswestry we confirm the fixed price in writing.

Sliding and folding industrial doors near Oswestry

Besides Oswestry, we can survey and quote for sites in Shrewsbury, Chester, Wellington and the rest of Shropshire.

Other services in Oswestry

More about Sliding and folding industrial doors · industrial doors in Oswestry. Last updated 19 October 2026.