Sliding and folding industrial doors in Barry

Quick answer

We can supply and fit steel sliding and bi-folding doors in Barry and across South Glamorgan, manual or electric, with insulated or single-skin leaves and wicket doors wherever staff need everyday access.

Town: Barry
Postcode district: CF62
Area: South Glamorgan
Survey: Free for new installations

What to specify

Insulated options. Insulated panel infill and edge seals for heated buildings.
Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.
No headroom needed. Leaves move sideways, so nothing coils above or runs under the roof.
Top-hung or bottom-rolling. Weight carried overhead or on a floor rail, chosen to suit the structure.
Robust build. Steel frames carry cladding to suit the building, from profiled steel to timber boarding.

Typical scopes of work

Supplying insulated sliding leaves with edge seals for a converted building now used as a heated workshop.
Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.
Automating a pair of heavy bi-parting sliding doors with a drive motor, safety edges and photocells.

Who is responsible for door safety at a site in Barry?

In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Sites in and around Barry vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Barry

Do you fit sliding doors on farm buildings around South Glamorgan?

Yes. We supply and fit steel sliding doors on agricultural buildings across South Glamorgan, including timber-clad leaves, bottom-rolling gear for lightweight portal frames and wicket doors so staff and livestock handlers can get in without opening the main leaves.

How much do sliding or folding industrial doors cost in Barry?

Our guide price is £5,995 to £24,995 ex VAT, supplied and fitted, depending on size, number of leaves, infill and whether the doors are manual or electric. After a free survey in Barry we confirm the fixed price in writing.

Will a sliding door fit our building in Barry?

It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.

Sliding and folding industrial doors near Barry

Working in Barry? We also take on jobs in Penarth, Cardiff, Caerphilly and across South Glamorgan.

Other services in Barry

More about Sliding and folding industrial doors · industrial doors in Barry. Last updated 19 October 2026.