Quick answer
Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Blackpool. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.
- Town
- Blackpool
- Postcode district
- FY1
- Area
- Lancashire
- Survey
- Free for new installations
Options that matter on site
- Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.
- Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.
- Louvres and vision. Louvred leaves for plant rooms and vision panels where visibility helps.
- Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.
- Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.
What this work can involve
- Fitting a louvred double steel door to a plant room or electrical switch room to keep it ventilated and secure.
- Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.
- Replacing a rotted timber fire exit door with a galvanised steel doorset and a BS EN 1125 panic bar.
Which workplace rules apply to these doors?
For premises in Blackpool, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.
How the work is organised
Sites in and around Blackpool vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Steel personnel door, single | £845 – £1,795 |
| Steel fire exit door with panic hardware | £1,095 – £2,395 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about steel personnel and fire exit doors
Can our Blackpool fire exit be locked from outside?
Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.
How long does it take to replace a steel door in Blackpool?
Most single steel doorsets are fitted in a day, including removal of the old door, fixing the new frame and making good. Made-to-measure doorsets have a manufacturing lead time, which we confirm with the quote.
Do you repair fire exit doors across Lancashire?
Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Lancashire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.
Steel personnel and fire exit doors near Blackpool
Besides Blackpool, we can survey and quote for sites in Thornton-Cleveleys, Lytham St Annes, Fleetwood and the rest of Lancashire.
- Steel personnel and fire exit doors in Thornton-Cleveleys
- Steel personnel and fire exit doors in Lytham St Annes
- Steel personnel and fire exit doors in Fleetwood
- Steel personnel and fire exit doors in Southport
- Steel personnel and fire exit doors in Preston
- Steel personnel and fire exit doors in Leyland
Other services in Blackpool
- Hangar and large-span doors
- Industrial door repairs
- Fire shutters
- Door safety upgrades
- Complete loading bays
- Industrial door installation
- PVC strip curtains
- Dock shelters and seals
More about Steel personnel and fire exit doors · industrial doors in Blackpool. Last updated 19 October 2026.