Steel personnel and fire exit doors in Aberdare

At a glance

Need a new fire exit door at your premises in Aberdare? We fit steel doors with panic bars to BS EN 1125 or emergency exit devices to BS EN 179, chosen according to who will actually use the exit.

Town: Aberdare
Postcode district: CF44
Area: Mid Glamorgan
Survey: Free for new installations

What we fit in Aberdare

Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.
Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.
Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.
Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.

Jobs we can carry out

Replacing a rotted timber fire exit door with a galvanised steel doorset and a BS EN 1125 panic bar.
Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.
Installing a steel staff entrance door with an overhead closer and keypad access beside a loading bay.

Which workplace rules apply to these doors?

For premises in Aberdare, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, as it applies in Wales, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

Keeping your site running during the work

For busy sites in Mid Glamorgan the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Guide prices

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Steel personnel and fire exit doors in Aberdare: your questions

Which fire exit hardware do we need at our Aberdare site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Can you fit fire-rated steel doors in Aberdare?

Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.

How much is a steel personnel door in Aberdare?

Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Aberdare premises in writing after a free survey.

Steel personnel and fire exit doors near Aberdare

Aberdare is in the CF44 postcode district in Mid Glamorgan. We also cover Merthyr Tydfil, Pontypridd, Ebbw Vale.

Other services in Aberdare

More about Steel personnel and fire exit doors · industrial doors in Aberdare. Last updated 19 October 2026.