Steel personnel and fire exit doors in Swansea

Quick answer

We can supply and install steel doorsets in Swansea and across West Glamorgan, from simple staff entrances to fire-rated and security-rated doors, with the frame, leaf and hardware supplied as one tested set.

Town: Swansea
Postcode district: SA1
Area: West Glamorgan
Survey: Free for new installations

Options that matter on site

Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.
Complete doorsets. Everything comes together as a matched doorset, so it fits and works as designed.
Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
Security options. From hinge bolts to certified security doorsets, the door can be specified to resist attack.

Examples of work we can quote for

Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Replacing a rotted timber fire exit door with a galvanised steel doorset and a BS EN 1125 panic bar.
Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.

Which workplace rules apply to these doors?

For premises in Swansea, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, as it applies in Wales, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

Access, phasing and timing

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Budgeting for steel personnel and fire exit doors in Swansea

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Steel personnel and fire exit doors in Swansea: your questions

Which fire exit hardware do we need at our Swansea site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

How long does it take to replace a steel door in Swansea?

Most single steel doorsets are fitted in a day, including removal of the old door, fixing the new frame and making good. Made-to-measure doorsets have a manufacturing lead time, which we confirm with the quote.

Can you fit fire-rated steel doors in Swansea?

Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.

Steel personnel and fire exit doors near Swansea

Our teams cover Swansea (SA1) and nearby Gorseinon, Neath, Port Talbot, along with the rest of West Glamorgan.

Other services in Swansea

More about Steel personnel and fire exit doors · industrial doors in Swansea. Last updated 19 October 2026.