Steel personnel and fire exit doors in Cleckheaton

Quick answer

Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Cleckheaton. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.

Town: Cleckheaton
Postcode district: BD19
Area: West Yorkshire
Survey: Free for new installations

Options for steel personnel and fire exit doors in Cleckheaton

Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.
Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.
Security options. Hinge bolts, multi-point locks and LPS 1175 rated doorsets.

Examples of work we can quote for

Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.
Installing a steel staff entrance door with an overhead closer and keypad access beside a loading bay.

Door rules for workplaces in England

Doors in Cleckheaton workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

Keeping your site running during the work

Sites in and around Cleckheaton vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about steel personnel and fire exit doors

Can you fit fire-rated steel doors in Cleckheaton?

Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.

Can our Cleckheaton fire exit be locked from outside?

Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.

Which fire exit hardware do we need at our Cleckheaton site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Steel personnel and fire exit doors near Cleckheaton

Cleckheaton is in the BD19 postcode district in West Yorkshire. We also cover Brighouse, Batley, Dewsbury.

Other services in Cleckheaton

More about Steel personnel and fire exit doors · industrial doors in Cleckheaton. Last updated 19 October 2026.