Steel personnel and fire exit doors in Bromsgrove

In short

Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Bromsgrove. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.

Town: Bromsgrove
Postcode district: B61
Area: Worcestershire
Survey: Free for new installations

Options that matter on site

Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.
Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.
Outside access. Key or code access from outside while the exit stays free from inside.
Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.

Typical scopes of work

Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Replacing a rotted timber fire exit door with a galvanised steel doorset and a BS EN 1125 panic bar.

Door rules for workplaces in England

Doors in Bromsgrove workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

Planning the work around your site

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Prices for steel personnel and fire exit doors in Bromsgrove

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Bromsgrove

Can a steel door at our Bromsgrove unit be security rated?

Yes. Where an insurer asks for a formal rating, we supply steel doorsets certified to LPS 1175 and install them to the certified specification. Let us know the rating required so we can quote the right product.

How long does it take to replace a steel door in Bromsgrove?

Most single steel doorsets are fitted in a day, including removal of the old door, fixing the new frame and making good. Made-to-measure doorsets have a manufacturing lead time, which we confirm with the quote.

Do you repair fire exit doors across Worcestershire?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Worcestershire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Steel personnel and fire exit doors near Bromsgrove

Besides Bromsgrove, we can survey and quote for sites in Redditch, Droitwich, Halesowen and the rest of Worcestershire.

Other services in Bromsgrove

More about Steel personnel and fire exit doors · industrial doors in Bromsgrove. Last updated 19 October 2026.