Bollards and door protection in Fleet

At a glance

Bollards and door protection for warehouses, yards and loading bays in Fleet. We look at where your doors are being hit, then fit bollards, guards, buffers and bumpers to stop it happening again.

Town: Fleet
Postcode district: GU51
Area: Hampshire
Survey: Free for new installations

Options for bollards and door protection in Fleet

Frame buffers. Rubber or polymer buffers on corners and frames at vehicle height.
Steel bollards. Rigid steel posts that stop vehicles firmly in front of guides and frames.
Polymer bollards. Bollards that flex on impact, sparing the floor, the vehicle and themselves.
Guide-rail guards. Protect the bottom of guides and tracks, where forks and pallets strike most often.
High visibility. Yellow or yellow-and-black finishes that drivers notice.

Jobs we can carry out

Replacing worn-through dock bumpers so reversing trailers stop short of the wall and the leveller lip.
Adding steel guide-rail guards to a row of sectional loading doors at a distribution centre.
Installing wheel guides and corner bollards on a run of loading bays to protect the shelter frames.

Loading bay safety in England

Dock levellers, shelters and restraints are work equipment, so in Fleet the business running the site must keep them in efficient working order under PUWER 1998, and keep traffic routes safe under the Workplace Regulations 1992. Dock levellers are built to BS EN 1398; powered loading bay doors are covered by the Supply of Machinery (Safety) Regulations 2008 and BS EN 12453.

Access, phasing and timing

Sites in and around Fleet vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for bollards and door protection

Bollards and door protection guide prices
Item	Guide price (ex VAT)
Bollard, installed	£125 – £445 each
Door protection (guide-rail guards, buffers)	£345 – £1,495 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Fleet

Can you protect our existing doors in Fleet?

Yes. Guards, buffers and bollards are fitted around existing doors and frames. If a guide or frame is already bent, we recommend repairing it first so the door runs properly behind its new protection.

How much do bollards cost to install in Fleet?

Our guide price is £125 to £445 ex VAT per installed bollard, depending on size, material and fixing. Guide-rail guards and buffers are £345 to £1,495 per door. We confirm a fixed price in writing after a free survey in Fleet.

Will fitting bollards damage the floor at our Fleet site?

We check slab thickness and look for buried services before drilling. Polymer bollards and proper foundations reduce the risk of slab cracking on heavy impacts, and we recommend the right fixing for your floor.

Bollards and door protection near Fleet

Besides Fleet, we can survey and quote for sites in Farnborough, Aldershot, Yateley and the rest of Hampshire.

Other services in Fleet

More about Bollards and door protection · industrial doors in Fleet. Last updated 19 October 2026.