Insulated roller shutter doors in Fleet

At a glance

Replacing a draughty roller shutter in Fleet? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.

Town: Fleet
Postcode district: GU51
Area: Hampshire
Survey: Free for new installations

Options that matter on site

Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.

Typical scopes of work

Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.

Powered door rules that apply in Fleet

Fleet is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for insulated roller shutter doors in Fleet

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Fleet: your questions

Does a powered insulated roller door in Fleet need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Can you replace our old roller shutter in Fleet with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Do you repair insulated roller doors across Hampshire?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Hampshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Insulated roller shutter doors near Fleet

Fleet is in the GU51 postcode district in Hampshire. We also cover Farnborough, Aldershot, Yateley.

Other services in Fleet

More about Insulated roller shutter doors · industrial doors in Fleet. Last updated 19 October 2026.