In short
Each steel door project in Fleet starts with a free survey of the opening, escape route and security needs, followed by a written fixed price before any work starts on site.
- Town
- Fleet
- Postcode district
- GU51
- Area
- Hampshire
- Survey
- Free for new installations
What to specify
- Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
- Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.
- Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
- Galvanised steel. Double-skin galvanised steel leaves with powder-coated finishes.
- Security options. Hinge bolts, multi-point locks and LPS 1175 rated doorsets.
Typical scopes of work
- Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
- Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
- Installing a steel staff entrance door with an overhead closer and keypad access beside a loading bay.
Which workplace rules apply to these doors?
For premises in Fleet, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.
Access, phasing and timing
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Budgeting for steel personnel and fire exit doors in Fleet
| Item | Guide price (ex VAT) |
|---|---|
| Steel personnel door, single | £845 – £1,795 |
| Steel fire exit door with panic hardware | £1,095 – £2,395 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about steel personnel and fire exit doors
How much is a steel personnel door in Fleet?
Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Fleet premises in writing after a free survey.
Can our Fleet fire exit be locked from outside?
Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.
Which fire exit hardware do we need at our Fleet site?
If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.
Steel personnel and fire exit doors near Fleet
Besides Fleet, we can survey and quote for sites in Farnborough, Aldershot, Yateley and the rest of Hampshire.
- Steel personnel and fire exit doors in Farnborough
- Steel personnel and fire exit doors in Aldershot
- Steel personnel and fire exit doors in Yateley
- Steel personnel and fire exit doors in Sandhurst
- Steel personnel and fire exit doors in Farnham
- Steel personnel and fire exit doors in Camberley
Other services in Fleet
- Fire shutters
- Bollards and door protection
- Cold store and freezer doors
- Complete loading bays
- Impact traffic doors
- Industrial door installation
- Industrial roller shutters
- Industrial door replacement
More about Steel personnel and fire exit doors · industrial doors in Fleet. Last updated 19 October 2026.