Steel personnel and fire exit doors in Farnborough

The short version

Replacing a worn timber or tired steel door at a site in Farnborough (GU14)? Our galvanised steel doorsets resist knocks, weather and forced entry, and are finished in a powder-coated colour of your choice.

Town: Farnborough
Postcode district: GU14
Area: Hampshire
Survey: Free for new installations

What to specify

Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.
Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.
Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.
Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.

What this work can involve

Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.

Which workplace rules apply to these doors?

For premises in Farnborough, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Steel personnel and fire exit doors in Farnborough: your questions

Can you fit fire-rated steel doors in Farnborough?

Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.

Can a steel door at our Farnborough unit be security rated?

Yes. Where an insurer asks for a formal rating, we supply steel doorsets certified to LPS 1175 and install them to the certified specification. Let us know the rating required so we can quote the right product.

Do you repair fire exit doors across Hampshire?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Hampshire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Steel personnel and fire exit doors near Farnborough

Working in Farnborough? We also take on jobs in Camberley, Aldershot, Fleet and across Hampshire.

Other services in Farnborough

More about Steel personnel and fire exit doors · industrial doors in Farnborough. Last updated 19 October 2026.