At a glance
Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Farnborough. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.
- Town
- Farnborough
- Postcode district
- GU14
- Area
- Hampshire
- Survey
- Free for new installations
Options that matter on site
- Fall protection. If a spring, cable or drive fails, the door is caught before it falls.
- Photocells. If something breaks the beam, the door will not close.
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
- Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.
- Safety edges. Edges on the closing rail detect contact and send the door back up.
Jobs we can carry out
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Fitting a full-height light curtain to an automatic sectional door on a busy pedestrian route.
Who is responsible for door safety at a site in Farnborough?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Prices for door safety upgrades in Farnborough
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about door safety upgrades
How much does a door safety upgrade cost in Farnborough?
Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Farnborough.
How long does a safety upgrade take in Farnborough?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
Can you force-test our doors in Farnborough?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Door safety upgrades near Farnborough
Working in Farnborough? We also take on jobs in Camberley, Aldershot, Fleet and across Hampshire.
- Door safety upgrades in Camberley
- Door safety upgrades in Aldershot
- Door safety upgrades in Fleet
- Door safety upgrades in Sandhurst
- Door safety upgrades in Yateley
- Door safety upgrades in Farnham
Other services in Farnborough
- Fire shutters
- Industrial door repairs
- Industrial roller shutters
- Sectional overhead doors
- PVC strip curtains
- Steel personnel and fire exit doors
- Industrial door replacement
- Planned maintenance contracts
More about Door safety upgrades · industrial doors in Farnborough. Last updated 19 October 2026.