Quick answer
Older door control panels may not accept modern monitored safety devices. At premises in Aldershot, we can replace them where needed, adding inverter control and better fault diagnostics in the same visit.
- Town
- Aldershot
- Postcode district
- GU11
- Area
- Hampshire
- Survey
- Free for new installations
Options for door safety upgrades in Aldershot
- Fall protection. Spring-break, cable-break and anti-fall devices against suspension failure.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.
- Photocells. If something breaks the beam, the door will not close.
- Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
Jobs we can carry out
- Adding warning beacons and photocells to a door that is being converted to automatic closing on a timer.
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Who is responsible for door safety at a site in Aldershot?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Keeping your site running during the work
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Budgeting for door safety upgrades in Aldershot
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Can you force-test our doors in Aldershot?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
Do our powered doors in Aldershot need safety upgrades?
It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.
Our door at our Aldershot site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Door safety upgrades near Aldershot
Our teams cover Aldershot (GU11) and nearby Farnham, Farnborough, Fleet, along with the rest of Hampshire.
- Door safety upgrades in Farnham
- Door safety upgrades in Farnborough
- Door safety upgrades in Fleet
- Door safety upgrades in Camberley
- Door safety upgrades in Sandhurst
- Door safety upgrades in Yateley
Other services in Aldershot
- Dock levellers
- Cold store and freezer doors
- Fire shutters
- Insulated roller shutter doors
- Door automation and controls
- Dock shelters and seals
- Dock leveller and loading bay repairs
- Bollards and door protection
More about Door safety upgrades · industrial doors in Aldershot. Last updated 19 October 2026.