In short
We can install sliding, hinged and high-speed cold store doors in Plymouth and across Devon, coordinating with your refrigeration engineer so the room is back at its working temperature quickly after the change.
- Town
- Plymouth
- Postcode district
- PL1
- Area
- Devon
- Survey
- Free for new installations
What we fit in Plymouth
- Electric sliding. Powered sliding doors that open on demand and close automatically, with full safety devices.
- Tight seals. The leaf pulls in against its gaskets on closing so cold air stays where it belongs.
- Pressure relief. We check pressure relief so a tightly sealed room does not suck the door shut.
- Impact protection. Kick plates, buffers and bollards to keep trucks off leaves and frames.
- Hygienic finishes. Plastisol-coated steel, stainless steel or GRP for food and pharmaceutical use.
Jobs we can carry out
- Protecting new cold store door frames with steel buffers and bollards on a busy forklift route.
- Replacing an iced-up sliding freezer door with a new insulated door, heated frame and heated threshold.
- Installing a high-speed freezer door in front of an existing sliding cold store door on a busy picking route.
Powered door rules that apply in Plymouth
Plymouth is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Keeping your site running during the work
Sites in and around Plymouth vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices for cold store and freezer doors
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Cold store and freezer doors in Plymouth: your questions
Do you repair cold store doors in Plymouth?
Yes. We replace gaskets, frame heaters, rollers, tracks, releases and drives on most makes. Repair visits are chargeable, and we quote before larger repairs or recommend replacement when the leaf itself has failed.
Why is our cold room door in Plymouth hard to open after it closes?
Usually negative pressure: air inside cools and contracts once the door seals. A correctly sized pressure relief valve, heated on freezers, solves this. We check for one on survey and can fit it with a new door.
What safety release do cold store doors in Plymouth need?
Every cold store door should open from inside without a key or tool, even when locked from outside. We fit a clearly marked inside release and can add an alarm button connected to a monitored panel.
Cold store and freezer doors near Plymouth
Our teams cover Plymouth (PL1) and nearby Paignton, Newton Abbot, St Austell, along with the rest of Devon.
- Cold store and freezer doors in Paignton
- Cold store and freezer doors in Newton Abbot
- Cold store and freezer doors in St Austell
- Cold store and freezer doors in Torquay
- Cold store and freezer doors in Exeter
- Cold store and freezer doors in Exmouth
Other services in Plymouth
- Complete loading bays
- Fire shutter servicing and drop tests
- Dock shelters and seals
- Dock leveller and loading bay repairs
- Dock levellers
- Insulated roller shutter doors
- Sectional overhead doors
- Industrial door installation
More about Cold store and freezer doors · industrial doors in Plymouth. Last updated 19 October 2026.