At a glance
Cold store and freezer doors for food producers, distributors, kitchens and pharmaceutical sites in Torquay. We survey the room, opening and traffic, then supply and fit an insulated door with the right seals and safety release.
- Town
- Torquay
- Postcode district
- TQ2
- Area
- Devon
- Survey
- Free for new installations
What we fit in Torquay
- Tight seals. The leaf pulls in against its gaskets on closing so cold air stays where it belongs.
- Electric sliding. Powered sliding doors that open on demand and close automatically, with full safety devices.
- Thick insulation. Foam-filled leaves sized to the room temperature, from chillers to freezers.
- Inside release. An emergency release on the inside face so nobody can be shut in.
- Heated frames. Freezer frames and thresholds are kept just warm enough that ice cannot form on the seals.
Typical scopes of work
- Renewing worn gaskets and the frame heater on a chiller door that no longer seals properly.
- Adding a heated pressure relief valve to a freezer room where suction makes the door hard to open once it closes.
- Protecting new cold store door frames with steel buffers and bollards on a busy forklift route.
Powered door rules that apply in Torquay
Torquay is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
How the work is organised
Most installations in Torquay can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.
Guide prices for cold store and freezer doors
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about cold store and freezer doors
Why is our cold room door in Torquay hard to open after it closes?
Usually negative pressure: air inside cools and contracts once the door seals. A correctly sized pressure relief valve, heated on freezers, solves this. We check for one on survey and can fit it with a new door.
Do you repair cold store doors in Torquay?
Yes. We replace gaskets, frame heaters, rollers, tracks, releases and drives on most makes. Repair visits are chargeable, and we quote before larger repairs or recommend replacement when the leaf itself has failed.
Do you supply cold store doors for food businesses in Devon?
Yes. We supply and fit cold store doors with hygienic finishes for food producers, processors, distributors and commercial kitchens across Devon, and we talk through your hygiene, cleaning and audit requirements at the survey before recommending a finish.
Cold store and freezer doors near Torquay
Torquay is in the TQ2 postcode district in Devon. We also cover Paignton, Newton Abbot, Exmouth.
- Cold store and freezer doors in Paignton
- Cold store and freezer doors in Newton Abbot
- Cold store and freezer doors in Exmouth
- Cold store and freezer doors in Exeter
- Cold store and freezer doors in Plymouth
- Cold store and freezer doors in Tiverton
Other services in Torquay
- Industrial door installation
- Steel personnel and fire exit doors
- Sliding and folding industrial doors
- PVC strip curtains
- Fire shutters
- Fire shutter servicing and drop tests
- Hangar and large-span doors
- Insulated roller shutter doors
More about Cold store and freezer doors · industrial doors in Torquay. Last updated 19 October 2026.