Quick answer
Is your freezer door icing up or failing to seal at your Bromsgrove site? We replace worn cold store doors with insulated sliding or hinged doors, heated frames and pressure relief where needed.
- Town
- Bromsgrove
- Postcode district
- B61
- Area
- Worcestershire
- Survey
- Free for new installations
What we fit in Bromsgrove
- Thick insulation. Foam-filled leaves sized to the room temperature, from chillers to freezers.
- Hygienic finishes. Smooth, cleanable finishes chosen to meet your hygiene and audit standards.
- Pressure relief. Relief valves to balance pressure after the door closes or during defrost.
- Tight seals. Compressible gaskets pressed against the frame as the door closes.
- Inside release. An emergency release on the inside face so nobody can be shut in.
Jobs we can carry out
- Protecting new cold store door frames with steel buffers and bollards on a busy forklift route.
- Motorising a heavy manual cold store door with pull-cord activation, a safety edge on the closing leaf and photocells.
- Fitting a hinged chiller door with a stainless steel finish to a walk-in cold room in a commercial kitchen.
Who is responsible for door safety at a site in Bromsgrove?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Prices for cold store and freezer doors in Bromsgrove
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Cold store and freezer doors in Bromsgrove: your questions
Do you repair cold store doors in Bromsgrove?
Yes. We replace gaskets, frame heaters, rollers, tracks, releases and drives on most makes. Repair visits are chargeable, and we quote before larger repairs or recommend replacement when the leaf itself has failed.
Why is our cold room door in Bromsgrove hard to open after it closes?
Usually negative pressure: air inside cools and contracts once the door seals. A correctly sized pressure relief valve, heated on freezers, solves this. We check for one on survey and can fit it with a new door.
What safety release do cold store doors in Bromsgrove need?
Every cold store door should open from inside without a key or tool, even when locked from outside. We fit a clearly marked inside release and can add an alarm button connected to a monitored panel.
Cold store and freezer doors near Bromsgrove
Our teams cover Bromsgrove (B61) and nearby Redditch, Droitwich, Halesowen, along with the rest of Worcestershire.
- Cold store and freezer doors in Redditch
- Cold store and freezer doors in Droitwich
- Cold store and freezer doors in Halesowen
- Cold store and freezer doors in Kidderminster
- Cold store and freezer doors in Stourbridge
- Cold store and freezer doors in Stourport-on-Severn
Other services in Bromsgrove
- Industrial door replacement
- Steel personnel and fire exit doors
- Sliding and folding industrial doors
- High-speed doors
- Impact traffic doors
- Fire shutter servicing and drop tests
- Complete loading bays
- Dock leveller and loading bay repairs
More about Cold store and freezer doors · industrial doors in Bromsgrove. Last updated 19 October 2026.