Sliding and folding industrial doors in Bromsgrove

At a glance

For agricultural and industrial buildings in Bromsgrove, we can replace worn sliding doors, upgrade them with new tracks and leaves, or automate them with the safety devices a powered door needs.

Town: Bromsgrove
Postcode district: B61
Area: Worcestershire
Survey: Free for new installations

Options for sliding and folding industrial doors in Bromsgrove

Robust build. Steel frames carry cladding to suit the building, from profiled steel to timber boarding.
Top-hung or bottom-rolling. Weight carried overhead or on a floor rail, chosen to suit the structure.
No headroom needed. Leaves move sideways, so nothing coils above or runs under the roof.
Wicket doors. Pass doors built into a leaf so staff need not open the whole door.
Folding leaves. Where there is little wall either side, folding leaves concertina into a compact stack.

Typical scopes of work

Renewing seized trolleys and a distorted overhead track on large sliding doors to a vehicle shed.
Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.
Replacing a damaged floor rail and guide wheels on a bottom-rolling door struck by a vehicle.

Who is responsible for door safety at a site in Bromsgrove?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for sliding and folding industrial doors in Bromsgrove

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Bromsgrove

Do you fit sliding doors on farm buildings around Worcestershire?

Yes. We supply and fit steel sliding doors on agricultural buildings across Worcestershire, including timber-clad leaves, bottom-rolling gear for lightweight portal frames and wicket doors so staff and livestock handlers can get in without opening the main leaves.

How long does it take to fit sliding doors in Bromsgrove?

A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.

How much do sliding or folding industrial doors cost in Bromsgrove?

Our guide price is £5,995 to £24,995 ex VAT, supplied and fitted, depending on size, number of leaves, infill and whether the doors are manual or electric. After a free survey in Bromsgrove we confirm the fixed price in writing.

Sliding and folding industrial doors near Bromsgrove

Bromsgrove is in the B61 postcode district in Worcestershire. We also cover Redditch, Droitwich, Halesowen.

Other services in Bromsgrove

More about Sliding and folding industrial doors · industrial doors in Bromsgrove. Last updated 19 October 2026.