Door automation and controls in Billingham

The short version

We can automate sectional doors, roller shutters and sliding doors in Billingham and across County Durham, choosing direct, centre or chain-drive motors and the activation method that suits the traffic using each door.

Town: Billingham
Postcode district: TS23
Area: County Durham
Survey: Free for new installations

Options that matter on site

Traffic lights. Signals show drivers when the door is fully open and warn when it moves.
Inverter drives. Frequency inverters move busy doors faster while cutting wear on every cycle.
Interlocks. Doors linked to each other, to levellers or to the alarm so they work in the right sequence.
Safety devices. Every automated door gets the detection its risk assessment needs, tested before use.
Activation options. Choose how the door is opened, from staff buttons to automatic vehicle detection.

Typical scopes of work

Fitting induction loops and an inverter control panel so forklifts can open a busy internal door without stopping.
Replacing an obsolete control panel with a modern unit, then re-testing the safety devices and closing forces.
Adding radar with cross-traffic suppression to a door on a busy aisle so passing trucks do not open it.

Who is responsible for door safety at a site in Billingham?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for door automation and controls in Billingham

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about door automation and controls

Which activation would suit our Billingham site?

It depends on who uses the door. Buttons suit staff, remotes suit drivers, pull cords and loops suit forklifts, and radar suits mixed traffic. We look at your traffic on survey and recommend a set-up.

How much does it cost to make a door electric in Billingham?

Our guide price for a manual-to-electric conversion is £1,195 to £3,195 ex VAT, including motor, control panel, basic controls and commissioning. Extra controls and safety devices are priced separately, and your fixed price in Billingham follows a free survey.

Can you add interlocks or traffic lights to doors around County Durham?

Yes. We fit airlock interlocks, door-to-leveller interlocks, traffic lights and warning beacons to new and existing doors across County Durham, subject to compatibility with the control panels already fitted, and replace panels where they cannot accept the extra inputs.

Door automation and controls near Billingham

Our teams cover Billingham (TS23) and nearby Stockton-on-Tees, Middlesbrough, Thornaby-on-Tees, along with the rest of County Durham.

Other services in Billingham

More about Door automation and controls · industrial doors in Billingham. Last updated 19 October 2026.