Door automation and controls in Greater Manchester

At a glance

We can automate sectional doors, roller shutters and sliding doors in Greater Manchester and across the North West, choosing direct, centre or chain-drive motors and the activation method that suits the traffic using each door.

Area: Greater Manchester
Nation: England
Main town: Manchester
Survey: Free for new installations

Options for door automation and controls in Greater Manchester

Traffic lights. Signals show drivers when the door is fully open and warn when it moves.
Interlocks. Doors linked to each other, to levellers or to the alarm so they work in the right sequence.
Activation options. Buttons, key switches, remotes, pull cords, loops, radar and access control.
Safety devices. Every automated door gets the detection its risk assessment needs, tested before use.
Inverter drives. Frequency inverters move busy doors faster while cutting wear on every cycle.

Examples of work we can quote for

Fitting induction loops and an inverter control panel so forklifts can open a busy internal door without stopping.
Fitting a centre-mounted motor to a roller shutter where a side wall leaves no room at the barrel end.
Replacing an obsolete control panel with a modern unit, then re-testing the safety devices and closing forces.

Safety law for industrial doors in England

Industrial doors in Greater Manchester are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

How long does a door automation job take in Greater Manchester?

A straightforward conversion is usually completed and commissioned in a day. Loops, interlocks and traffic lights add time, and we plan the work so the door is out of use for as little time as possible.

How much does it cost to make a door electric in Greater Manchester?

Our guide price for a manual-to-electric conversion is £1,195 to £3,195 ex VAT, including motor, control panel, basic controls and commissioning. Extra controls and safety devices are priced separately, and your fixed price in Greater Manchester follows a free survey.

Do automated doors in Greater Manchester need more maintenance?

Powered doors need their motors, controls and safety devices checked as well as the mechanical parts, so at least an annual service is common practice, more often for busy doors. Servicing visits are chargeable; the survey for an automation job is free.

Towns in Greater Manchester we cover

We cover 37 towns in Greater Manchester for door automation and controls, including Manchester, Oldham, Wigan, Bolton.

Other services in Greater Manchester

More about Door automation and controls. Last updated 19 October 2026.