Quick answer
Door automation for warehouses, workshops and loading bays in Denton. We convert manual doors to electric, fit motors and control panels, and add loops, radar, remotes and interlocks to suit how each door is used.
- Town
- Denton
- Postcode district
- M34
- Area
- Greater Manchester
- Survey
- Free for new installations
Options for door automation and controls in Denton
- Manual override. Chain or crank override so doors open during power cuts.
- Activation options. Choose how the door is opened, from staff buttons to automatic vehicle detection.
- Interlocks. Doors linked to each other, to levellers or to the alarm so they work in the right sequence.
- Matched motors. Direct, centre-mounted, chain-drive or tubular motors sized to the door.
- Inverter drives. Frequency inverters move busy doors faster while cutting wear on every cycle.
Typical scopes of work
- Converting hand-chained sectional doors to electric operation with push-button controls, safety edges and photocells.
- Installing an airlock interlock between two high-speed doors so only one can be open at a time.
- Replacing an obsolete control panel with a modern unit, then re-testing the safety devices and closing forces.
Powered door rules that apply in Denton
Denton is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
For busy sites in Greater Manchester the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Prices for door automation and controls in Denton
| Item | Guide price (ex VAT) |
|---|---|
| Manual-to-electric conversion | £1,195 – £3,195 |
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Denton
Which activation would suit our Denton site?
It depends on who uses the door. Buttons suit staff, remotes suit drivers, pull cords and loops suit forklifts, and radar suits mixed traffic. We look at your traffic on survey and recommend a set-up.
Can our door in Denton be automated?
If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.
How much does it cost to make a door electric in Denton?
Our guide price for a manual-to-electric conversion is £1,195 to £3,195 ex VAT, including motor, control panel, basic controls and commissioning. Extra controls and safety devices are priced separately, and your fixed price in Denton follows a free survey.
Door automation and controls near Denton
Our teams cover Denton (M34) and nearby Hyde, Dukinfield, Droylsden, along with the rest of Greater Manchester.
- Door automation and controls in Hyde
- Door automation and controls in Dukinfield
- Door automation and controls in Droylsden
- Door automation and controls in Ashton-under-Lyne
- Door automation and controls in Stalybridge
- Door automation and controls in Stockport
Other services in Denton
- Insulated roller shutter doors
- Bollards and door protection
- Cold store and freezer doors
- Industrial door motor replacement
- Sectional overhead doors
- Door safety upgrades
- Industrial door repairs
- High-speed doors
More about Door automation and controls · industrial doors in Denton. Last updated 19 October 2026.