Door automation and controls in Colne

At a glance

Door automation for warehouses, workshops and loading bays in Colne. We convert manual doors to electric, fit motors and control panels, and add loops, radar, remotes and interlocks to suit how each door is used.

Town: Colne
Postcode district: BB8
Area: Lancashire
Survey: Free for new installations

What to specify

Manual-to-electric. Hand-operated doors converted to power, with the paperwork a powered door needs.
Interlocks. Airlocks, door-to-leveller and fire alarm interfaces.
Safety devices. Safety edges, photocells and light curtains, force-tested to BS EN 12453.
Activation options. Choose how the door is opened, from staff buttons to automatic vehicle detection.
Matched motors. The motor type and size are chosen for the door's weight, space and cycle count.

Examples of work we can quote for

Fitting induction loops and an inverter control panel so forklifts can open a busy internal door without stopping.
Converting hand-chained sectional doors to electric operation with push-button controls, safety edges and photocells.
Fitting a centre-mounted motor to a roller shutter where a side wall leaves no room at the barrel end.

Powered door rules that apply in Colne

Colne is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for door automation and controls in Colne

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Can you add interlocks or traffic lights to doors around Lancashire?

Yes. We fit airlock interlocks, door-to-leveller interlocks, traffic lights and warning beacons to new and existing doors across Lancashire, subject to compatibility with the control panels already fitted, and replace panels where they cannot accept the extra inputs.

Can our door in Colne be automated?

If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.

How much does it cost to make a door electric in Colne?

Our guide price for a manual-to-electric conversion is £1,195 to £3,195 ex VAT, including motor, control panel, basic controls and commissioning. Extra controls and safety devices are priced separately, and your fixed price in Colne follows a free survey.

Door automation and controls near Colne

Besides Colne, we can survey and quote for sites in Nelson, Burnley, Accrington and the rest of Lancashire.

Other services in Colne

More about Door automation and controls · industrial doors in Colne. Last updated 19 October 2026.