Door automation and controls in Blyth

Quick answer

We can automate sectional doors, roller shutters and sliding doors in Blyth and across Northumberland, choosing direct, centre or chain-drive motors and the activation method that suits the traffic using each door.

Town: Blyth
Postcode district: NE24
Area: Northumberland
Survey: Free for new installations

What to specify

Manual override. Chain or crank override so doors open during power cuts.
Interlocks. Doors linked to each other, to levellers or to the alarm so they work in the right sequence.
Traffic lights. Signals show drivers when the door is fully open and warn when it moves.
Safety devices. Every automated door gets the detection its risk assessment needs, tested before use.
Inverter drives. Frequency inverters move busy doors faster while cutting wear on every cycle.

Jobs we can carry out

Installing an airlock interlock between two high-speed doors so only one can be open at a time.
Fitting induction loops and an inverter control panel so forklifts can open a busy internal door without stopping.
Adding traffic lights and warning beacons to a yard door shared by lorries and pedestrians.

Who is responsible for door safety at a site in Blyth?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for door automation and controls in Blyth

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Door automation and controls in Blyth: your questions

Can you add interlocks or traffic lights to doors around Northumberland?

Yes. We fit airlock interlocks, door-to-leveller interlocks, traffic lights and warning beacons to new and existing doors across Northumberland, subject to compatibility with the control panels already fitted, and replace panels where they cannot accept the extra inputs.

How much does it cost to make a door electric in Blyth?

Our guide price for a manual-to-electric conversion is £1,195 to £3,195 ex VAT, including motor, control panel, basic controls and commissioning. Extra controls and safety devices are priced separately, and your fixed price in Blyth follows a free survey.

Can our door in Blyth be automated?

If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.

Door automation and controls near Blyth

Working in Blyth? We also take on jobs in Ashington, Cramlington, Whitley Bay and across Northumberland.

Other services in Blyth

More about Door automation and controls · industrial doors in Blyth. Last updated 19 October 2026.