Door automation and controls in Gateshead

The short version

We can automate sectional doors, roller shutters and sliding doors in Gateshead and across Tyne and Wear, choosing direct, centre or chain-drive motors and the activation method that suits the traffic using each door.

Town: Gateshead
Postcode district: NE8
Area: Tyne and Wear
Survey: Free for new installations

Options that matter on site

Manual override. A manual means of opening is always kept, so the door is never stuck shut without power.
Inverter drives. Soft start and stop with faster opening for high-cycle doors.
Manual-to-electric. Conversions for sectional, roller and sliding doors in good order.
Matched motors. Direct, centre-mounted, chain-drive or tubular motors sized to the door.
Interlocks. Airlocks, door-to-leveller and fire alarm interfaces.

Examples of work we can quote for

Linking loading bay doors to dock leveller controls so levellers deploy only when the doors are fully open.
Fitting induction loops and an inverter control panel so forklifts can open a busy internal door without stopping.
Converting hand-chained sectional doors to electric operation with push-button controls, safety edges and photocells.

Safety law for industrial doors in England

Industrial doors in Gateshead are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Sites in and around Gateshead vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for door automation and controls

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about door automation and controls

Can you add interlocks or traffic lights to doors around Tyne and Wear?

Yes. We fit airlock interlocks, door-to-leveller interlocks, traffic lights and warning beacons to new and existing doors across Tyne and Wear, subject to compatibility with the control panels already fitted, and replace panels where they cannot accept the extra inputs.

Which activation would suit our Gateshead site?

It depends on who uses the door. Buttons suit staff, remotes suit drivers, pull cords and loops suit forklifts, and radar suits mixed traffic. We look at your traffic on survey and recommend a set-up.

Can our door in Gateshead be automated?

If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.

Door automation and controls near Gateshead

Working in Gateshead? We also take on jobs in Newcastle upon Tyne, Wallsend, Hebburn and across Tyne and Wear.

Other services in Gateshead

More about Door automation and controls · industrial doors in Gateshead. Last updated 19 October 2026.