Industrial door motor replacement in Colne

The short version

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Colne. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Colne
Postcode district: BB8
Area: Lancashire
Guide price: £845 – £2,395

What's included

Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Brake and override. Brakes tested and manual override checked on every change.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.

Jobs we can carry out

Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.

Safety law for industrial doors in England

Industrial doors in Colne are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Service and repair visits in Colne are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Colne: your questions

Should we replace the whole door instead of the motor in Colne?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

How much does an industrial door motor replacement cost in Colne?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Colne costs £145 to £195 ex VAT.

How soon can a door motor in Colne be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Industrial door motor replacement near Colne

Working in Colne? We also take on jobs in Nelson, Burnley, Accrington and across Lancashire.

Other services in Colne

More about Industrial door motor replacement · industrial doors in Colne. Last updated 19 October 2026.