Industrial door motor replacement in Rawtenstall

The short version

We can replace failed and obsolete door motors in Rawtenstall and across Lancashire, from tubular motors in small service shutters to heavy-duty chain drives on large, heavy sectional and sliding doors.

Town: Rawtenstall
Postcode district: BB4
Area: Lancashire
Guide price: £845 – £2,395

How we look after doors in Rawtenstall

Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Panel upgrades. New control panels with monitored safety inputs and inverter options.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.

Examples of work we can quote for

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.

Powered door rules that apply in Rawtenstall

Rawtenstall is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Budgeting for industrial door motor replacement in Rawtenstall

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Will our door in Rawtenstall be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

How soon can a door motor in Rawtenstall be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Should we replace the whole door instead of the motor in Rawtenstall?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Industrial door motor replacement near Rawtenstall

Working in Rawtenstall? We also take on jobs in Accrington, Bury, Burnley and across Lancashire.

Other services in Rawtenstall

More about Industrial door motor replacement · industrial doors in Rawtenstall. Last updated 19 October 2026.