Industrial door motor replacement in Shirley

The short version

Motor replacement in Shirley starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Shirley
Postcode district: B90
Area: West Midlands
Guide price: £845 – £2,395

How we look after doors in Shirley

Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Brake and override. Brakes tested and manual override checked on every change.

Typical scopes of work

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.

Powered door rules that apply in Shirley

Shirley is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Budgeting for industrial door motor replacement in Shirley

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Should we replace the whole door instead of the motor in Shirley?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

How much does an industrial door motor replacement cost in Shirley?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Shirley costs £145 to £195 ex VAT.

Will our door in Shirley be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement near Shirley

Shirley is in the B90 postcode district in the West Midlands. We also cover Solihull, Birmingham, Smethwick.

Other services in Shirley

More about Industrial door motor replacement · industrial doors in Shirley. Last updated 19 October 2026.