Door safety upgrades in Shirley

At a glance

Every safety upgrade in Shirley starts with a free survey and force test of the door as it stands, followed by a written fixed price for the devices we recommend before any work starts.

Town: Shirley
Postcode district: B90
Area: West Midlands
Survey: Free for new installations

Options for door safety upgrades in Shirley

Force testing. Closing forces measured against BS EN 12453 limits and recorded.
Warning devices. Lights and sounders make sure people know when a door is about to move.
Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
Photocells. If something breaks the beam, the door will not close.
Light curtains. Full-height multi-beam detection across the whole opening.

Typical scopes of work

Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.

Safety law for industrial doors in England

Industrial doors in Shirley are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for door safety upgrades in Shirley

Door safety upgrades guide prices
Item	Guide price (ex VAT)
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door
Repair visit (attendance and first hour)	£145 – £195

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Shirley

Our door at our Shirley site has a bypassed safety edge. What should we do?

Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.

Do our powered doors in Shirley need safety upgrades?

It depends on how they are controlled and used. Doors that close automatically or on a single press typically need edges and photocells or light curtains. A survey and force test shows whether your doors meet current expectations.

How much does a door safety upgrade cost in Shirley?

Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Shirley.

Door safety upgrades near Shirley

Our teams cover Shirley (B90) and nearby Solihull, Birmingham, Smethwick, along with the rest of the West Midlands.

Other services in Shirley

More about Door safety upgrades · industrial doors in Shirley. Last updated 19 October 2026.