Quick answer
Busy doors in Smethwick (B66) that close automatically need reliable detection. A full-height light curtain stops the door before it touches anyone, with a safety edge on the bottom rail as back-up.
- Town
- Smethwick
- Postcode district
- B66
- Area
- West Midlands
- Survey
- Free for new installations
Options that matter on site
- Light curtains. Full-height multi-beam detection across the whole opening.
- Panel upgrades. Control panels with monitored safety inputs where older ones fall short.
- Warning devices. Beacons, sounders and traffic lights to warn people of a moving door.
- Force testing. We measure how hard the door closes and record the results at each test point.
- Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
Examples of work we can quote for
- Replacing a damaged or bypassed safety edge on a yard roller shutter and re-testing its closing forces.
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
- Upgrading an old relay control panel so monitored safety edges and photocells can be connected to it.
Who is responsible for door safety at a site in Smethwick?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.
Budgeting for door safety upgrades in Smethwick
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about door safety upgrades
How much does a door safety upgrade cost in Smethwick?
Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Smethwick.
Do you upgrade doors from other installers across the West Midlands?
Yes. We upgrade safety devices on most makes of powered door across the West Midlands, whoever installed them, checking that new devices are compatible with the existing control panel and replacing the panel where needed.
Our door at our Smethwick site has a bypassed safety edge. What should we do?
Stop using the door under power until the safety device is working, or use it on hold-to-run only if the risk assessment allows. We can replace the edge or fit alternative detection and re-test the door.
Door safety upgrades near Smethwick
Smethwick is in the B66 postcode district in the West Midlands. We also cover West Bromwich, Birmingham, Halesowen.
- Door safety upgrades in West Bromwich
- Door safety upgrades in Birmingham
- Door safety upgrades in Halesowen
- Door safety upgrades in Wednesbury
- Door safety upgrades in Dudley
- Door safety upgrades in Tipton
Other services in Smethwick
- Bollards and door protection
- Dock shelters and seals
- Sliding and folding industrial doors
- Dock levellers
- Fire shutter servicing and drop tests
- Steel personnel and fire exit doors
- Industrial door replacement
- High-speed doors
More about Door safety upgrades · industrial doors in Smethwick. Last updated 19 October 2026.