The short version
Replacing a door at a unit in Cirencester (GL7) is a chance to upgrade: insulated instead of single skin, electric instead of manual, or high-speed where the opening is busy.
- Town
- Cirencester
- Postcode district
- GL7
- Area
- Gloucestershire
- Survey
- Free for new installations
Options for industrial door replacement in Cirencester
- Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
- Commissioning. Each new door is tested and handed over with the documents it needs.
- Free survey. Existing door, opening and space assessed free of charge.
- Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
- Disposal. Old doors taken away for recycling or disposal.
Examples of work we can quote for
- Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.
- Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.
- Phasing the replacement of several loading doors so only one bay is out of use at a time.
Safety law for industrial doors in England
Industrial doors in Cirencester are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Access, phasing and timing
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Budgeting for industrial door replacement in Cirencester
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Industrial door replacement in Cirencester: your questions
Do you replace doors at multiple sites across Gloucestershire?
Yes. We replace doors across Gloucestershire, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.
How long will our opening in Cirencester be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
Should we repair or replace our door in Cirencester?
If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.
Industrial door replacement near Cirencester
Our teams cover Cirencester (GL7) and nearby Stroud, Cheltenham, Swindon, along with the rest of Gloucestershire.
- Industrial door replacement in Stroud
- Industrial door replacement in Cheltenham
- Industrial door replacement in Swindon
- Industrial door replacement in Gloucester
- Industrial door replacement in Chippenham
- Industrial door replacement in Tewkesbury
Other services in Cirencester
- Cold store and freezer doors
- PVC strip curtains
- Bollards and door protection
- Complete loading bays
- Dock leveller and loading bay repairs
- Hangar and large-span doors
- Industrial roller shutters
- Insulated roller shutter doors
More about Industrial door replacement · industrial doors in Cirencester. Last updated 19 October 2026.